Wanted: 13" 10-Hole Alloy Rims
Moderator: Moderators
Post a reply
8 posts • Page 1 of 1
Wanted: 13" 10-Hole Alloy Rims
by MonzaMikeV8 » Thu Aug 11, 2011 11:55 am
Hey there,
Is someone willing to sell his 13" 10-hole alloy rims ?
Mike
1973 Imperial LeBaron
1975 Monza 2+2 Hatchback 262 V8
1979 Ford Bronco XLT
1984 Buick Regal Limited
1988 Jeep Cherokee Limited 4.0
MonzaMikeV8- Posts: 97
- Joined: Fri Apr 29, 2011 6:54 am
- Location: Austria, Europe
1975 Chevrolet Monza 2+2
Top
Re: Wanted: 13" 10-Hole Alloy Rims
by EagleFish » Thu Aug 11, 2011 4:48 pm
Mike,
Stan Sadowski Auto Wrecking, Hendersonville, Pa, has four (4) 13" 10-hole aluminum alloy wheels for sale.
No lug nuts or center caps.
I have seen the wheels.
They are in good condition but, will need cleaned and polished.
Their price is $250.00.
I borrowed one of the wheels but, can return it to them or to you if you buy the set.
Sadowskis is about 10 miles away from me south on I-79.
They also have a set of four (4) 13" aluminum alloy Buick "D" hole wheels.
Their phone number is 724-746-3365.
Let me know if I can be of help.
John (John and Richard)
- EagleFish
- Posts: 1937
- Joined: Wed Jun 28, 2006 5:44 pm
- Location: Clearwater & Dade City, FL
1978 Buick Skyhawk- YIM
- Garage
Top
Re: Wanted: 13" 10-Hole Alloy Rims
by MonzaMikeV8 » Fri Aug 12, 2011 6:48 am
John,
wow that sounds really good. I was ready to invest even more but thats just fine. I'll give him a call as soon as he is up. I hope he is willing to ship them since i live 4000 miles away...
Thanks John
Mike
1973 Imperial LeBaron
1975 Monza 2+2 Hatchback 262 V8
1979 Ford Bronco XLT
1984 Buick Regal Limited
1988 Jeep Cherokee Limited 4.0
MonzaMikeV8- Posts: 97
- Joined: Fri Apr 29, 2011 6:54 am
- Location: Austria, Europe
1975 Chevrolet Monza 2+2
Top
Re: Wanted: 13" 10-Hole Alloy Rims
by EagleFish » Fri Aug 12, 2011 1:44 pm
Mike,
I called Sadowski's to vouch for you that this is a legitimate sale adn to advise them that I know about this transaction.
I mentioned, that I still have teh one wheel that I borrowed.
I gave them a $100.00 seciruty deposit to borrow the wheel.
Pittsburgh Technical Institute is using to fit the center cap that they are drawing in 3D CADD for me.
As soon as, they are done with the wheel, I would send it along.
All I would need are the funds from you to cover the shipping charges and materials.
In the United States it costs about $20.00 per wheel to ship, plus materials and my gas. (minimal on gas - I am unemployed right now)
The cost will probably be greater because of shipping outside the U. S.
Mike, I may have confused the price of the wheels with another set I was looking at.
It is possible that the price for these wheels is $300.00.
Let me know how you make out.
You either contact me by email through H-Body messaging or at my personal email addy:
EagleFish123@yahoo.com
John (John and Richard)
- EagleFish
- Posts: 1937
- Joined: Wed Jun 28, 2006 5:44 pm
- Location: Clearwater & Dade City, FL
1978 Buick Skyhawk- YIM
- Garage
Top
Re: Wanted: 13" 10-Hole Alloy Rims
by rocketride » Sat Aug 13, 2011 10:21 am
Here's some on Craigslist Pittsburgh PA.
He who dies with the most toys.......is still dead.
rocketride- Posts: 1550
- Joined: Sun Oct 29, 2006 10:56 am
- Location: Duncan, Oklahoma
1980 Oldsmobile Starfire SX
Top
Re: Wanted: 13" 10-Hole Alloy Rims
by EagleFish » Sat Aug 13, 2011 2:02 pm
Actually, that is the same set of wheels that I told Mike about.
They are at Sadowski's Auto Wrecking about 10 miles from me.
Thanks for trying to help.
John (John and Richard)
- EagleFish
- Posts: 1937
- Joined: Wed Jun 28, 2006 5:44 pm
- Location: Clearwater & Dade City, FL
1978 Buick Skyhawk- YIM
- Garage
Top
Re: Wanted: 13" 10-Hole Alloy Rims
by HotfootGT » Sun Aug 14, 2011 7:22 am
14 or 15" in the 4 on 4 bolt pattern would be great!
Howdy from Hotlanta
73 Kammback "Little Buddy"
62 Skylark 215 CI Aluminum V8
71 Dodge D-100 Sweptline
HotfootGT- Posts: 1146
- Joined: Wed Jun 28, 2006 3:48 pm
- Location: Hotlanta
1973 Chevrolet Vega Kammback- Website
- Garage
Top
Re: Wanted: 13" 10-Hole Alloy Rims
by EagleFish » Sun Aug 14, 2011 3:54 pm
HotfootGT,
Thanks for the input.
Did you take my H-Body Wheel survey?
If not, please do.
It is listed onsite.
John (John and Richard)
- EagleFish
- Posts: 1937
- Joined: Wed Jun 28, 2006 5:44 pm
- Location: Clearwater & Dade City, FL
1978 Buick Skyhawk- YIM
- Garage
Top
Post a reply
8 posts • Page 1 of 1
Return to General Discussion
Who is online
Users browsing this forum: No registered users and 2 guests